On Friday night I realised that I needed something to take to my ASG meeting the next morning and seeing I have so many garment ideas running around my head I have ended up with some paralysis as to what to cut out next. This is when I spied this project that had been sitting on my sewing desk since earlier this year.
I purchased a kit for a Laminate Cotton sew-along thinking it would give me some practice for sewing my rain coat trench that is one of the garments on my sewing list.
I chose the Orchid Fiona Panel by Riley Blake Designs. The kit was packed up so nicely with samples of the different cotton laminates, a Wonder Clip as well as the fusible Pellon, zips, cord and cord holder to make the 2 cosmetic bags and a sunglasses case. I cut out all the pieces on Friday night and fused the Pellon to the cotton laminate – on the ironing board I had the Pellon face up, the laminate cotton on top and a muslin press cloth on top, iron on cotton and no steam and it worked perfectly.
I used a size 14 needle and a Teflon foot for my sewing machine and normal Gutterman thread for the construction. All pressing was done with a dry iron on cotton setting and my muslin pressing cloth.
Here is the completed set:
The larger cosmetic bag showing the interior:
The smaller case showing the interior:
This was a good quick project and I am surprised at how well my travel sized bottles fit in them!
There were a couple of questions on my last post about KS 3740.
shams – the neckline is the cowl from this pattern, it falls very softly in this fabric so is hard to see it in any detail.
mary – I do a round shoulder adjustment which moves the shoulder seam 1.5cm forward and when I lined up the sleeve head with this point the cap height of the sleeve is not in the correct place causing my sleeve to twist. I normally place the sleeve cap notch 1.5cm behind the shoulder seam then the sleeve cap height is in the correct position and my sleeve doesn’t twist. I hope that makes sense.