This was supposed to a quick project and I have evidence of it its initial construction back in September 2011, not so quick!
My stumbling block came about when I tried to use my Coverstitch to stitch down the very thick seam allowance along the band edge due to the thicker cotton knit and interfacing I used, I ended up with a very thick seam here. After spending quite a few hours trying to get the tension to work, it was then left for time out on my sewing table.
So the other weekend it was packed with this top and taken to my guild meeting.
When I was in the USA last year, I purchased a number of different sewing machine needles and I thought I would have a play with the Schmetz Drilling needle to see how it would work on this band.
I used two matching thread colours and a olive colour for the 3 threads and I am very happy with the way it has turned out.
I then used my Coverstitch with the triple needles to sew the hems. Unfortunately the stitches disappeared into the fabric as it isn’t interfaced, but you can still seem them just.
Last weekend was the first time I have been able to add the Snap Source Espresso size 16 Open Prong Ring Snap Fasteners.
For some reason I didn’t do my usual adjustments to this pattern, and the only change I can see that I did do was to try and reduce the sleeve cap height.
This was a toile and after seeing these photos I can see I need to do more pattern adjustments e.g. reduce the shoulder length, do a better job of the sleeve cap height, add some width to the sleeves, they very snug with a long sleeve top underneath, and those pull lines?
I’m heading to the ASG Convention in Adelaide at the end of the month and have booked myself into the Fractured Knits Cardi workshop and I plan on using the Jalie 2566 cardigan, so it will be interesting to see the differences between the two cardigans.
I love cardigans but have found it difficult over the last few years to get them at the length and colour that I want them to be, so this is a pattern style that I really want to have as a TNT.